TRPP 5810 Remote Pulser/Preamplifier
Available on order
The TRPP 5810™ unit is a high-performance remote pulser/preamplifier dedicated to TOFD inspections and compatible with the Olympus scanner line as well as PV-100 and PV-200 weld-inspection systems. This remote pulser/preamplifier provides…
Our team confirms specifications, price, lead time and delivery terms in your quotation.
Product information
The TRPP 5810™ unit is a high-performance remote pulser/preamplifier dedicated to TOFD inspections and compatible with the Olympus scanner line as well as PV-100 and PV-200 weld-inspection systems.
This remote pulser/preamplifier provides an optimum signal-to-noise ratio for TOFD inspections by combining a 40 dB preamplifier with a remote high-voltage (200 V) pulse repeater in a single, small enclosure. The TRPP 5810 supports two UT channels, enabling simultaneous inspection with one or two pairs of TOFD probes.
The TRPP 5810 can be used as a pulser and/or preamplifier.
TRPP 5810 as a Pulser
- Provides an additional pulse gain in order to generate a stronger signal when needed to reveal difficult-to-detect flaws.
TRPP 5810 as a Preamplifier
- Provides the additional gain or broadband signal-to-noise enhancement necessary for optimum signal acquisition on thick sections of material exhibiting high ultrasonic attenuation.
- Allows driving of long cables from remotely located sensors.
Features
- Withstands pulsed voltages up to 300 V for pulse widths in excess of 500 ns at PRF up to 10 kHz.
- Dimensions (W × H × L): 57 mm × 32 mm × 90 mm
- Weight: 300 g
- UT connectors: 8 × LEMO 00 female
- Water/moisture resistance: NEMA 4-IP66. Rustproof.
- Powered by an external 12 VDC source or from the instrument.
- Power connector: Compatible with standard Olympus umbilical cables (male Fisher 103 type)
- Red power-on LED indicator
- Operating temperature range: -10 °C to 60 °C
Specifications
Pulser
- Remote, high-voltage (200 V) pulse repeater
- PRF of up to 10 kHz at 100 ns per channel and up to 20 kHz at 50 ns for a single channel
- Pulser-side outputs protected against misuse and improper connection from the instrument outputs.
Preamplifier (Receiver)
- 40 dB preamplifier
- Accommodates probe frequency range from 1 MHz to 15 MHz.
- Preamplifier-side inputs and outputs protected against misuse and improper connection from the instrument outputs.
Options
- Power Cable (from TomoScan FOCUS LT)
5 m power supply cable linking to TomoScan FOCUS LT™ - Power Cable (from OmniScan)
10 m power supply cable linking to OmniScan® - Transformer and Cable
Transformer (120 VAC to 240 VAC input to 12 VDC output) with 10 m power supply cable